[<<Prev]
[Next>>]
[October 12, 2022]


Before I got too many things wired up permanently, I wanted to fire up a few devices and see that everything "talked". I connected the GAD29 to my 3 ARINC input sources, power and the CAN bus. I also wired the CAN bus into the G5.


Not any great success tonight. The GAD29 has a status LED on it which was solid green, which meant it was getting power, but not talking on the CAN bus. My G5 firmware is old (6.30, latest version is 8.00). I will update and check the impedance on my CAN bus tomorrow.

[<<Prev]
[Next>>]

http://RVplane.com

Last Modified: August 13, 2023